Aquamaster Tools P700 Pro 2 Combination Meter

Aquamaster Tools P700 Pro 2 Combo Meter

The innovative Combo Meter P700 Pro2 with a modern and robust housing is equipped with a large display on which all values can be easily read.

The software has also been updated: this means that accurate measurements can now be read out more quickly. The electrodes can be easily replaced if they are worn or defective.

The Combo Meter P700 Pro2 is ideal for measuring pH, EC, CF, PPM and temperature values in liquid plant foods, pool water, hot tubs and ponds.

You can quickly and easily switch between the different parameters at the touch of a button. The meter is pre-calibrated and supplied with batteries.

Use:

Plug the power cord into the power outlet and connect the USB plug to the meter.

Connect the pH and EC electrodes to the meter.

Remove the protective cap from the pH and EC electrodes.

Turn on the meter.

Dip the pH and EC electrodes into the liquid to be measured and rotate them gently until the readings stabilize.

Use the C/F button to toggle between Celsius and Fahrenheit units. Use the MODE button to toggle between EC/CF and PPM measurements.

Turn off the meter after use.

Clean the pH and EC electrodes with tap water to minimize the risk of contamination.

Replace the protective cap on the pH and EC electrodes.

The measuring instrument is also suitable for constant use. For this purpose, the electrodes must be immersed in the solution to be measured. Note that the instrument will then have to be calibrated more frequently. It is also essential to check the electrodes for algae build-up and clean them thoroughly if necessary.

Specification:

measuring range

pH: 0.0 - 14.0 pH

EC: 0.0 - 19.9 mS/cm

FC: 0.0 - 199 CF

PPM: 0 - 1999 PPM

Temperature: 0°C ~ 50°C (32°F ~ 122°F)

resolution

pH: ± 0.1 pH

EC: 0.1 mS/cm

CF: 0.1 CF

PPM: 10 PPM

Temperature: 0.1 °C (1.0 °F)

measurement accuracy

pH: ± 0.1 pH

CE: ± 2 % FS

HR: ± 2 % FS

PPM: ± 2 % FS

Temperature: ± 0.5°C (32°F)

Temperature compensation: 0°C - 50°C (32°F - 122°F)

Scale PPM 700 PPM

calibration

pH: 2 autocalibration points 4.0 - 7.0 pH

EC: 1 auto calibration point 1.4 - 3.0 - 12.88 EC

Features: battery indicator and automatic temperature compensation

Power supply: DV 6V DC adapter with rechargeable battery

Calibration display: with correct calibration

Waterproof: IP65 (electrodes IP67 waterproof)

Dimensions: 200 x 140 x 34 mm

Weight: 418 grams