Stainless steel cooling unit for Crafty

Crafty Stainless Steel Cooling Unit - FTV

French Touch Vaporizer is proud to present its new stainless steel vaporizer cooling unit for Crafty and Crafty+ vaporizers as well as for the Mighty!

Indeed, with the success of our stainless steel unit for Mighty and the recent release of Crafty+, we had to design a new one...

It's now done, don't hesitate anymore and boost your Crafty with this great Crafty/Crafty+ Stainless Steel Cooling Unit!

Optimized cooling unit!

First of all, the small edge of the first production series of the stainless steel unit that slightly cut the plastic case of the Mighty has been removed in the new production.

No risk that this will happen to your Crafty or Crafty+!

So, without this famous edge, this stainless steel cooling unit fits and removes even more easily from the vaporizer while remaining perfectly in place.

Secondly, we have greatly optimized the unit technically

Indeed, the cooling path of the vapor has been redesigned and greatly lengthened compared to the original plastic unit.

It was important to us that this unit offers an efficient cooling while it is smaller than the Mighty...

The path of the steam increases from 3.5 cm to about 11.5 cm for increased efficiency!

In addition, we have removed a lot of density from the unit so that it is lighter and offers better heat dissipation.

To do this, we thinned the heat dissipation fins and removed mass where it was not needed, such as the attachment of the unit to the vaporizer, where it heats up the most!

french touch vaporizer ftv logo

Stainless steel is a healthy material for vaporization

Stainless steel is very stable at vaporization temperatures and is therefore perfectly suited for this purpose!

Even though Storz and Bickel plastic is of very good quality, it is wise to replace it with a more noble material such as stainless steel.

Indeed, it is a more neutral material which offers a much better respect of the flavors of your plants!

However, stainless steel is heavier but as we said above, we have removed a lot of density to minimize the problem!

Crafty+ FTV Titanium Mouthpiece

As with the stainless steel unit for Mighty, a titanium mouthpiece for Crafty/Crafty+/Mighty is included in this complete package!

Titanium is an even better material than steel because it heats up and cools down faster, as it is less dense.

So this Titanium mouthpiece will always remain cool in the mouth even when the cooling unit is hot!

It is important to note that Titanium is a stable and clean material that respects your health.

FTV glass mouthpiece

As generous as ever, FTV has included in this pack a glass mouthpiece, already well known to users for its great aroma.

The glass is of course healthy in terms of vaporization, but it is still quite fragile ...

However, it remains the most neutral material and therefore the most respectful of the flavors restored by the vapor!

Moreover, the condensation of steam that is created on its surface seems to provide a sensation of moisture and smoothness which is very pleasant.

Let us note nevertheless the fact that the glass is of low thermal conductivity, it thus takes a certain time to heat but also to cool...

Thus, although more respectful of the aromas of the plants, glass will cool less efficiently than Titanium!

Finally, whether you prefer glass or Titanium, you will be satisfied with this super complete pack!

Steam path largely optimized

In order to keep the efficiency of the original cooling unit, French Touch Vaporizer has completely redesigned the steam path for better performance.

It turns out that the challenge was harder for us than when we designed our stainless steel cooling unit for Mighty...

Indeed, the Crafty+ being smaller, we had less cooling options...

The solution was to lengthen the steam path to the maximum!

Two circuits with stops

The distance between the inlet and outlet of the unit is about 3.5 cm...

However, the double circuit with stoppers that the steam runs through is about 11.5 cm!

By being separated in two and banging against the stops of this long path, the cooling is devilishly efficient!

Less stainless steel for more dissipation

Under the advice of our engineer, we decided to remove as much density as possible from this unit to facilitate heat dissipation.

We have therefore refined all the heat dissipation fins, which makes them more efficient!

In addition, we have removed mass in some parts like the junction with the vaporizer.

Thus, with less density in the stainless steel cooling unit, it dissipates heat better and is lighter!

Be careful though, because despite these optimizations, stainless steel is still heavier than plastic and will always end up heating up, much to the regret of those who like long vaping sessions...

For those who do decent sessions of about 5 minutes, the Inox will not have time to heat up to an unpleasant point.

A generous pack

French Touch Vaporizer spoils you with this very complete pack.

Indeed, the two mouthpieces provided are worth already 37.5 euros alone!

- 1* Crafty/Crafty+ stainless steel cooling unit

- 1* Glass mouthpiece

- 1* Titanium mouthpiece

- 5* Seals

- 5* Stainless Steel Grates for Crafty

All delivered in a nice FTV box!

To conclude

Crafty/Crafty+ Stainless Steel Cooling Unit is the ultimate alternative to plastic for cooling vapor!

Perfectly suited for standard length vaping sessions, the vapor it delivers remains very pleasant and delicious even with longer sessions.

On the other hand, the Titanium mouthpiece always remains cool in the mouth for more comfort!

French Touch Vaporizer has struck again with this exclusive accessory for Crafty/Crafty+ effective and well thought!