The LUMATEK PLUS (HID+LED) control panel
is a dual-signal digital lighting control system that provides precise external control of your lighting units, drivers and ballasts Lumatek. Using innovative technology, this controller intelligently monitors the ambient temperature of your crop, automates lighting duration and intensity, safety controlled dimming and on/off. Simply connect it to your lamps Lumatek, drivers or controllable ballasts and easily regulate your grow room environment.
The Lumatek Control Panel Plus is a dual signal, dual channel digital lighting controller. Each of the two channels (zones) can control up to 200 controllable luminaires or ballasts Lumatek HID with a digital RS485 signal or up to 50 LED drivers with an analog 0-10V signal. It is possible to use each zone to control the luminaires in two separate independent rooms or to control up to 400 luminaires in one room with two different types of light sources.
Each channel (zone) can control DC powered ballasts/drivers; zone A can control DC powered ballasts/drivers, while zone A or zone B can be set to control different ballasts/drivers, e.g. zone A can be set to control 600W LED luminaires and zone B can be set to control 600W or 315W HID ballasts.
IMPORTANT
The Lumatek control panel can only be used with the new digital (HDI) ballasts from Lumatek, which we do not have in stock yet.
INNOVATION
Can be connected to Lumatek controllable HID ballasts and fixtures; 315W, 600W, 630W and 1000W
Can be connected to LED drivers and controllable fixtures from Lumatek; 90 W, 465 W, 600 W and 1000 W.
Dual RS485 digital signal for HID and 0-10V analog protocol for LED.
INTELLIGENT
Automate switching, timing, dimming and simulate sunrise and sunset periods.
Temperature controlled dimming and switching for safety control
Automate light intensity and PPFD
GROWING SOLUTIONS
Control up to 400 ballasts or HID devices (200 ballasts per channel - Zone A & B)
Power supply: 100 - 240V AC 50/60Hz - DC 5V/2A
HID Match Ballast: 315W, 600W, 630W, 1000W
Match LED drivers: 90W, 465W, 600W, 1000W
Power dimming range: 10% - 115
Power control accuracy: 1%.
Temperature controlled safety dimming range: 0ºC-40ºC
Temperature controlled safety switching range: 10ºC-50ºC
Sunrise and sunset time: 0-30 min
Dimensions: 125 mm x 80 mm x 25 mm
Control panel for up to 400 HID ballasts or 100 LED drivers
Two channels (Zone A and Zone B)
Maximum number of ballasts/drivers per zone: 200 (RS485) HID or 50 (0-10V) LED
Total number of ballasts/drivers per controller: 400 (RS485) HID or 100 (0-10V) LED
24-hour light time measurement and switching
Monitoring and control of temperature sensors
Dimmer control (in 1% steps)
Automation of safety and temperature control
Simulate sunrise and sunset to reduce plant stress
Automation of light intensity
Contents:
1 x Lumatek Plus control panel
1 x Power adapter and cable
2 x Temperature sensor, 5m cable
2 x HID control connection cable 5m
2 x LED control connection cable
